Monte Allums Guotar Pedal Mods

DISCLAIMER - Absolutely no refunds. All sales are final. We cannot be held responsible if you ruin your pedal. I got ripped off by a buyer of my TR-2 mod. Said he wasn't happy with the mod so I offered to buy the TR-2 from him. I gave him $110 in good faith. When I received the pedal it was non-functioning. He had drilled the hole for the pot in the wrong place piercing the ribbon going to the depth pot and completely pulled 4 traces from the PCB. And he wanted to know why the mod sounded bad. Because of this I will no longer issue refunds of any type on mods. If you do not have the skills required to perform the mod then please let us do the mod for you. Monte Allums

Subscribe to my Newsletter

* indicates required

Boss NS-2 Mod Hi-Fi Plus Mod
I've used a Boss NS-2 for years. Great for Bass or Guitar. They are a very convenient way to knock down noise. I also use mine to mute my signal when changing guitars and to Daisy Chain power to my other pedals on my board. The NS-2s send and return feature makes it a very handy tool in any rig. The stock NS-2 is a great tool to have but it does suck some of the life from your tone. Itís not as bad as some pedals Iíve played but it does blanket the frequencies a bit.

This is especially noticeable in the higher frequencies. By replacing two of the lower quality opamps with much higher quality opamps, and replacing a few critical components in the circuit with higher quality parts, you'll find the tone of the modded NS-2 to have more clarity and fullness. I also beef up one of the voltage caps. I find this adds a bit of girth and fullness to the mids and bass. With these changes I have substantially improved the tone and effect of the NS-2. You'll also find that the noise threshold knob will now have a more even sweep.

WARNING!- Boss has changed the circuit of the new NS-2s in production. They have switched to using smd components. Please note that my mods will NOT work with this new design and I will not be offering a mod for it. The tiny smd components are next to impossible to mod or replace. If you are buying a mod for your NS-2 open your pedal up and make sure it looks like this. If it does my mods will work with your pedal. Also, there are a couple of non-smd versions that Boss has that my mod will also NOT work with. If your NS-2 looks like this my mod will NOT work with your pedal.

With this Kit you will receive two 3mm Super Bright White LEDs, Solder and Desoldering Braid along with detailed easy-to-follow High Rez PDF Mod Instructions sent to you as an e-mail attachment.

©2019 All Rights Reserved, Monte Allums - Site by

Pedal Mods Boss Keeley Analogman Guitar Shield Copper Shield eNut Pedal Mod Parts OD-308 Proco MXR Best Pedal Mods Strat Shield Tele Shield How to Mod Pedals Monte Allums Telecaster Stratocaster SD-1 DS-1 TR-2 RAT MT-2 CS-3 OD-3 TS-9 TS-808 TS-7 TS-5 Boss Ibanez